LED Trafo 24Volt 100Watt IP67

LED Trafo 24V 100W Netzteil  IP67 NLP-100-24

Besonders geeignet für LED Stripes und vieles mehr. Auch für den Outdoor Bereich. Wasserfest IP67.

OUTPUT
DC VOLTAGE:                24V
RATED CURRENT:           4.2A
CURRENT RANGE:          0 ~ 4.2A
RATED POWER:              100.8W
RIPPLE & NOISE (max.):  150mVp-p
VOLTAGE TOLERANCE:    ±5.0%
LINE REGULATION:    ±1.0%
LOAD REGULATION:   ±2.0%
SETUP, RISE TIME:    2000ms, 25ms / 230VAC    2000ms, 25ms / 115VAC
HOLD UPTIME (Typ.): 50ms/230VAC 14ms/115VAC at full load

INPUT
VOLTAGE RANGE:          90 ~ 264VAC 127 ~ 370VDC
FREQUENCYRANGE:       47 ~ 63Hz
EFFICIENCY(Typ.):         88%
AC CURRENT:                2.2A/115VAC 1.2A/230VAC
INRUSH CURRENT(Typ.):  COLD START 75A(twidth=700?s measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER  2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT:      0.25mA/ 240VAC

SCHUTZ
OVERLOAD:           110 ~ 150% rated output power
OVER VOLTAGE:    27.6 ~ 32.4V

ENVIRONMENT
WORKING TEMP.:   -25 ~ +70℃(Refer to „Derating Curve“)
WORKING HUMIDITY:            20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY:  -40 ~ +80?, 10 ~ 95% RH
VIBRATION:                10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SICHERHEIT & EMC 
SAFETYSTANDARDS:            UL8750,CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,IP67 approved. Design refer to EN60950-1
WITHSTAND VOLTAGE:       I/P-O/P:3KVAC
ISOLATION RESISTANCE:    I/P-O/P:>100M Ohms / 500VDC / 25?/ 70% RH
EMC EMISSION:                Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A(?80% load), EN61000-3-3
EMC IMMUNITY:                Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A

Weitere Infos
MTBF:               703Khrs min. MIL-HDBK-217F (25?)
Abmessung:      190*52*37mm (L*W*H)
Gewicht:          0.63Kg